Pages Navigation Menu

Home living ideas

Home Living Ideas

Buying A New Home? Two Reasons Why You Need A Foundation Contractor

Posted by on May 19, 2016 in Uncategorized | Comments Off on Buying A New Home? Two Reasons Why You Need A Foundation Contractor

Buying a new home can be an extremely exciting and busy time that is full of activity.  While you most likely have already brought in a general inspector to evaluate the home to make sure it’s a good investment, there’s one professional that you may have neglected:  A foundation contractor.  These individuals are trained on how to properly examine the foundation of a structure to make sure it’s sound enough to inhabit.  Learning more about the benefits of hiring a foundation contractor when buying your next house can help you see why you should contact one today. Foundation Contractors Check Home Settling One of the most compelling reasons why you should hire a foundation contractor is because they will check to make sure that the home you’re looking to purchase is settled correctly.  This is vital since home settling issues can lead to severe problems in the future. It’s natural for a home to gradually settle into the earth after it’s built.  This grounds the house so that shifts in the surface of the ground won’t have such a negative effect on your house.  However, if there have been heavy rains in your area, there may not be enough substance for the home to settle properly.  This could mean that you’ll have cracks in your walls, or that your windows or doors don’t shut properly because they have become misaligned due to the shifting of the home’s foundation. When you bring in a foundation contractor, they will advise you on whether or not you should possibly introduce more soil into the areas around your home so that the foundation can nestle into the ground properly.  Listening to their expertise could save you a substantial amount of money in future home repairs. Foundation Contractors Check For Waterproofing Another reason why it’s so important for you to hire a foundation contractor is because they can examine the lower level of your home to find out if it is watertight.  The little cracks and crevices that may go unnoticed to the untrained eye can easily be detected by an experienced foundation contractor, and can help them determine if you need to waterproof your home.  Taking the time to seal up open spaces can make the difference between your dealing with flooding in your home or even if unwanted critters have access to your abode. Consulting with a foundation contractor when you’re buying a home could prove to be a very wise decision.  Contact one of these professionals as soon as possible so you can enjoy these benefits and more. For a foundation contractor, contact a company such as RCW...

read more

Ideas For Adding Luxury To Your Bathroom Remodel

Posted by on Apr 13, 2016 in Uncategorized | Comments Off on Ideas For Adding Luxury To Your Bathroom Remodel

When you decide on a bathroom makeover, you probably have all kinds of ideas of what you want to incorporate. These ideas often comprise adding space and probably storage. Additional light, be it natural or artificial, is probably a concern as well. However, a bathroom remodel should also add value to your home, so you want to make the finished product as luxurious as possible. Design your bathroom makeover with luxury in mind for maximum value. Add Trim and Molding Your bathroom looks more luxurious when you add custom details. One way to manage this is by incorporating molding and other trim into your décor. For example, Home and Garden TV describes adding molding to plain doors to give them a more upscale feel. It’s also possible to add beadboard around a mirror or even baseboards all around the bottom of the walls. Such additions give the overall look architectural interest. Try Monochromatic A hallmark of luxury is chic décor, and monochromatic palettes are chic. The easiest way to implement this look is by going all white, but that can feel cold. Instead, choose granite for your countertops or backsplash, and let the color tone drive the rest of your palette. For example, if the granite features classic gray marbling, paint the walls a similar shade, and have white tiles grouted in charcoal for your shower stall. Keep any cabinetry within that cool palette. Install a Walk-in Shower and a Soaking Tub Naturally, one of the primary purposes for your bathroom is to bathe. If space allows, separate the two bathing spaces by installing both a walk-in shower and a soaking tub. The soaking tub can be located anywhere, including in the center of the floor, but positioning it under a window offers a pleasant bathing retreat. For the shower, consider a seamless glass enclosure to minimize the visual impact. Delineate Spaces Another hallmark of luxury is having a specific space for everything. For instance, have contractors construct a toilet room – or two if the bathroom is shared. Likewise, set up a special place for grooming. For example, design a corner with a magnifying mirror and track lighting as a shave or makeup station. If the bathroom is part of an open layout master suite, consider making the closet a transitional space. This allows a walk-in closet to become a dressing room. No matter what the utilitarian additions are for your bathroom remodel, consider luxurious ideas such as a monochromatic palette and trimwork for a makeover that adds value to your home. Talk to professionals like Two by Four Construction LLC to learn...

read more

How To Avoid Common Mistakes When Choosing A Contractor For Commercial Water Well Installation

Posted by on Apr 13, 2016 in Uncategorized | Comments Off on How To Avoid Common Mistakes When Choosing A Contractor For Commercial Water Well Installation

If you don’t have a lot of experience with having to install a commercial water well system, it’s easy to forget certain aspects of the process. Here are a few common issues that people installing wells for their business often overlook, including why these issues are important and how to handle them. Failing to Maximize Pump Installation Location  It’s going to be tempting to just rush to a location once you find one that’s suitable for your needs at all. However, it really is important to make sure that you do your due diligence regarding location before you commit. This is especially the case when you’re doing the submersible water well pump part of the install. The key is to find an area where the pump unit can push water into tanks for storage so that you can use the ground water at the top whenever this is required. This can vary based on your particular situation, however. Forgetting Permits Almost any commercial construction project is going to require permits. People who are enthusiastic about setting up water wells and pumps can sometimes forget about this. Obviously, this depends on your state. But, you really don’t want to put any effort into setting up your water well and pump when you might have to undo half of it later due to not checking permit concerns. This is why it’s critical to make sure you contact a well installation company in order to make sure that you have all of your bases checked. After all, many states have a lot of permit procedures to navigate, and unless you’re an expert, you should really get some help. Getting Behind on Time Another important aspect of the installation that people often forget is the fact that micromanaging time when it comes to boring holes for wells and doing well installation at all is extremely important. This is because in a commercial enterprise, you could lose thousands and thousands of dollars if there’s a delay in installation. That’s why it’s important to check for this when you look for well-boring contractors. These contractors will often have reviews available online and elsewhere that will give you a strong estimate of how long they tend to take for boring well holes to get the well dug up so that your business can then use it. Many people just pick the first company around without paying attention to this. Contact a company like Coonse Well Drilling & Pump Co Inc for more...

read more

Can’t Get Into Your Commercial Safe And You Think It’s On Purpose? Call an Expert Immediately

Posted by on Mar 30, 2016 in Uncategorized | Comments Off on Can’t Get Into Your Commercial Safe And You Think It’s On Purpose? Call an Expert Immediately

Do you own a commercial property and more than one person has access to the safe, but now there is a problem with the safe? If you can’t get the safe open and you wonder if this was done on purpose, you want to get in contact with a professional to get in the safe right away. There are a lot of potential problems that can occur when too many people are allowed to access your space. You’ll want to consider the following options right away to see what is going on. Call a Locksmith A locksmith will be able to get into the safe quickly by picking the lock or another method, so you can see what’s inside. The locksmith should also be able to tell if the lock had been tampered with so you couldn’t get it open, or if it was just jammed and damaged because of age. The locksmith is a security professional and can tell you why the safe was vulnerable, or if it was at risk for forced entry because of the design. Have Video Monitors Installed Have IP cameras installed around the inside and the outside of the building so you can always monitor what is going on, if you are there or at home or traveling. This way you can look back and see all of the actions that took place around the safe, and what was going on when someone had to get into the safe to store or remove money. IP cameras are great because they can be accessed via smartphone or any Internet access. Replace the Safe Have the safe replaced by the locksmith when they are there, and get one of the safest models you can afford. Make sure that you are as particular as possible with choosing who is going to have access to the safe when you aren’t there, so you don’t run into potential problems like this again. The locksmith can link the safe with your business security system. If you have an odd feeling that it isn’t an accident that you can’t get into the safe, and you think that something malicious could be going on, you want to get inside the safe to see what is going on right away, and to count your money. Call a locksmith like Mike’s Lock & Key and get to the bottom of the problem, and then replace the safe to prevent future...

read more

Do’s And Don’ts For Vinyl Siding Installation On Your Remote Cabin

Posted by on Mar 4, 2016 in Uncategorized | Comments Off on Do’s And Don’ts For Vinyl Siding Installation On Your Remote Cabin

If you want to install vinyl siding on your rural cabin to protect its exterior from the elements, then it is important that you follow these time-tested do’s and don’ts to ensure that you perform a professional-quality installation: Do buy a saw blade for your circular saw that is manufactured to cut through vinyl. General use blades are wonderful for cutting wood, but they are too thick to cut vinyl and will crack your siding. Don’t install your vinyl saw blade with its teeth angled towards the back of the saw. If you install the blade with its teeth angled towards you, then it will cut through the vinyl siding without fracturing it. If you are cutting and having problems, then double check the direction of the blade to make sure that it is pointed in the correct direction. Do purchase a specialized vinyl slot hole punch tool to use during your siding installation. Use the punch tool to cut a slot into the vinyl siding strips near their ends. These custom slots allow you to nail down the ends of the siding in order to keep it from blowing around in strong storms. Don’t drive the nail heads past the very top of the vinyl siding material. When you nail your new siding onto your cabin, your goal is to hold it in place without driving the nail heads in so far that they cause the siding to bend. Tap the nails until they are flush sitting on the outer edge of the siding and then stop. This will give your siding the ability to move around slightly in the wind and not break, and it will be enough to hold the siding in place so that it does not flap wildly in storms. Do use the thickest starter strip material that is available for the siding that you choose for your cabin. The starter strip is installed just above the soil layer, and the thickest starter strip will give you the best protection from the elements and the best overall look once your siding installation is completed. If you have ever seen a vinyl installation with a large gap between the siding and the dirt, then you have seen what using a starter strip that is too narrow looks like. Don’t install any of your vinyl siding or starter strips without using a contractor’s level. It is impossible to make your siding straight all around your cabin without using a level, and the last thing you want to do is stand back to inspect your installation and find out that it looks crooked. If you have issues with any of these instructions, contact a business, such as Superior...

read more

Troubleshooting Two Common Water Heater Problems

Posted by on Feb 10, 2016 in Uncategorized | Comments Off on Troubleshooting Two Common Water Heater Problems

If you have been having some problems with your water heater lately, then you could call a professional or you could try to troubleshoot the problem yourself. Before calling in the big guns, it’s a good idea to take a look at the problem yourself, just to see if you can handle it yourself. To help you out with that, here are some common water heater problems and how you can quickly diagnose them: No Hot Water at All? If you aren’t getting any hot water at all, then you first want to take a look at the power. If your water heater isn’t getting any power, then there obviously isn’t going to be any heating going on. If you have a gas heater, then you want to take a look at the pilot light. If it’s lit, then you’re good so far. If it isn’t lit, then you have found your problem. There might not be any gas flowing into the heater at all, so you’ll want to make sure that your gas main is turned on. Some of the parts might simply not be tightened, which would result in safeties that would prevent the unit from functioning at all. If you have an electric heater, then you’ll want to make sure that the power line to the unit is undamaged. If that isn’t the problem, then your circuit breaker might be responsible. Not Enough Hot Water? If you are getting a bit of hot water, but not nearly enough, then there are a couple of possibilities. First, you might have a leak on your hands. If the pipes leading from the water heater to the rest of your house have sprung a leak, then it might seem like the water heater is having problems. It’s quite important to identify and catch leaks as quickly as possible, since they can cause quite a bit of water damage if left unchecked. Your heater might also just be too small for your current needs. If you have been running out of hot water frequently or even in the middle of a shower, then you might be burning through your hot water too quickly. A larger reservoir can correct that by giving you a larger pool of hot water to draw from. If that’s the case, then you will either need to cut back on your hot water usage or upgrade to a larger tank. You could also get a unit that is much faster at heating water, which can allow you to get hot water without needing a huge tank. If you have questions about water heaters, visit 2 Guys Plumbing and Heating...

read more

Choosing A Fence For Your Dog? Avoid These Common Oversights

Posted by on Jan 18, 2016 in Uncategorized | Comments Off on Choosing A Fence For Your Dog? Avoid These Common Oversights

One of the most common reasons why people put up fences is to keep their dogs in their yard. However, if you’re not careful, the fence you put up might not serve this purpose as well as you intended. When choosing and constructing a dog fence, be sure to avoid making these common oversights. Forgetting that dogs can dig under fences. Most people build fences tall enough to keep dogs from jumping over them, but there’s another way your dog can break free – by digging under the fence. Luckily, there are two ways to prevent his. You can choose a fence that extends a foot or so below ground so that when your dog starts digging, he just runs into more fence.  Make sure you choose a strong material if you go with this option so that it does not break down under the soil. Pressure-treated lumber and vinyl are good choices. Another option is to have a trench dug where your fence will be, and then fill that trench with concrete. Once the concrete is dry, you can cover it with dirt. When your dog digs, he’ll run into the concrete. This tends to be the better option when you have a non-solid fence, such as a picket or chain link fence, since burying a fence of this type is tougher than burying a solid one and is likely look conspicuous. Forgetting that dogs can chew on fences. Especially when they’re young and bored, dogs love to chew. Thus, some types of fences are not safe choices. Most wood is not usually a good choice since it will need to be treated with water repellents and insecticides that are not good for your dog to digest. However, cedar is a safe bet, since it is naturally water resistant and repels pests without insecticides. Vinyl and metal chain link fencing are also good choices. You also want to keep this in mind when choosing a fence style. A solid, paneled fence is a better choice than a picket or post-and-rail fence since it will have fewer surfaces that your dog can get his mouth around. If you choose a fence that will be safe if your dog chews it (or unappealing to chew in the first place) and are make sure that you guard against your dog being able to dig under it, you should have an easier time keeping your dog safe within your...

read more

Safety First: Fall Protection Equipment Is Not Optional

Posted by on Dec 31, 2015 in Uncategorized | Comments Off on Safety First: Fall Protection Equipment Is Not Optional

Before embarking on any new construction project, you need to first identify any possible job hazards. Whenever you are dealing with heights of 20, 40 and even 100 feet off the ground, you have to make sure you are as safe as possible. The key is to do whatever it takes to minimize your chances of falling and injuring yourself. The higher the height, the more dangerous the task becomes. To minimize your risk of falling, here are a couple things you need to have when on the job. Positioning Equipment First, you need a device that is going to hold you securely in place without having to use your hands to hold onto everything. Hands-free operation allows you to get more done in a shorter amount of time. Make sure that whatever device you choose only allows you to fall two feet at most. Less is better. There are four main components to look for in this equipment: body wear, anchor point, connecting device and fall arrest backup. Restraints A restraint device is used to prevent workers from being able to get too close to an edge or other dangerous fall hazard. By limiting connector length, you can save yourself from possible injuries. Restraints are made up of three key components: connecting device, body wear and anchor point. Connecting devices are typically fixed lengths and the anchor point should be tested for two times the amount of force. Personal Arrest Systems In case you were to slip or fall, these arrest systems will help to absorb the energy produced as you fall downward. This applies to any type of fall from four feet or higher. While you might not plan on falling anytime soon, these systems will make sure that you aren’t thrown for a loop as you fall. They minimize shock and allow you to safely fall. They are composed of a connecting device, body wear and anchor point. By using the above tools, you can minimize your chances of getting injured on the job. Regardless of how far off the ground you might be, you need to make sure you have the right tools in place to succeed. Being injured isn’t exactly something you expect to happen to you. However, you can make sure you don’t sustain worse injuries than you need to. If you aren’t sure of what equipment to purchase, make sure to look to a safety equipment company like Public Works Supply or others for more...

read more

3 Types of Flashing That Can Help Waterproof Your Roof

Posted by on Dec 14, 2015 in Uncategorized | Comments Off on 3 Types of Flashing That Can Help Waterproof Your Roof

Roof repairs and installation projects focus on ensuring the roof is as waterproofed as possible to prevent damage within your home. Waterproofing becomes trickier on roofs with architectural elements such as sharp corners, dormers, or emerging piping or chimneys. Roof flashing is one way your roofing contractor can ensure these tricky places are waterproofed. Flashing is simply flexible metal pieces that can be bent to fit around the corners or round protrusions that are hard to snugly protect using shingles. There are a few different styles or types of flashing that work in different ways. Discuss your options and needs with a roofing service, such as Darnell Construction, before the project begins. Drip Edge Flashing The area of the roof between the rafters and the gutters is called the fascia. The fascia should overlap the gutter slightly so that water running off your roof is delivered well into the gutter rather than at the edge, where it would risk getting caught between the fascia and gutter and causing water damage. If your existing fascia doesn’t overlap the gutters, you can ask your roofing contractor to install new fascia or to install drip edge flashing. The drip edge flashing acts as a fascia extension to ensure that the flat sloping piece extends over the gutter. Drip edge flashing is cheaper to install than an entirely new fascia and allows you to retain any decorative features of your existing fascia. The drip edge is also handy if your roof is missing the fascia entirely and simply has shingles that fail to extend over the gutter well enough. Channel and Valley Flashing Channel flashing and valley flashing both help funnel water from lower sections of roof created by the roof’s architecture. The channel flashing forms a “u” in areas where a sloped section of roof meets a vertical or near vertical section of roof or a wall. The channel flashing essentially forms a gutter that can carry the water out of a tight area and down to the actual gutters. Valley flashing is placed in areas where two meeting roof sections form a valley or trough. If the valley doesn’t have enough of a slope, water can get trapped in this low area and start to cause moisture-related rotting. The valley flashing forms a slanted slick tunnel that can carry the water down to the gutter. Vent Pipe and Chimney Flashing Vent pipe and chimney flashing are both designed to fit snugly around protrusions through the roof. Vent pipe flashing fits around any pipework such as air conditioner venting or water pipe ventilation. Chimney flashing, as the name suggests, fits around where the chimney emerges from the roof. Using vent or chimney flashing can prevent moisture and weather damage to the pipes and chimney below the roof level and to the shingles immediately surrounding the...

read more

Choosing Between Granite And Quartz Kitchen Countertops

Posted by on Nov 24, 2015 in Uncategorized | Comments Off on Choosing Between Granite And Quartz Kitchen Countertops

If you want to replace the old laminate countertops in your home with natural stone, then you will need to decide between granite and quartz. While both stone choices will look wonderful installed and will last for many years, each type of stone does have its unique characteristics, advantages, and disadvantages. Here is the information you need to make this important choice for your kitchen remodel: Characteristics of Granite Stone Granite countertops are made out of a boulder that is quarried out of the ground. The large granite boulders are slabbed with a large saw into sections that are used for countertops. Since granite is a natural stone from the earth, it comes in many different colors and styles, with no two stones being identical to each other. Both granite and quartz countertops are extremely durable and will last for as long as you own your house and beyond.  Advantages and Disadvantages of Granite Countertops Since granite contains many different minerals, it is a porous stone. Granite countertops require sealing every year to keep them from absorbing liquids and becoming stained. While granite countertops are generally less expensive to purchase than those made of quartz, you need to consider the costs of sealing the granite every year. Quartz countertops do not need to be sealed because they are made with a resin. The major advantage of granite countertops is their unique look and the fact that they are lighter to install than those made of quartz. Characteristics of Quartz Stone Unlike their granite cousins, quartz stone countertops are not made of a single slab of rock, rather they are made out of crushed quartz that is mixed with an epoxy resin and formed into slabs. The addition of the resin makes the quartz countertops completely waterproof and stainproof. For this reason, quartz countertops never need to be sealed or have any maintenance performed on them. Advantages and Disadvantages of Quartz Countertops While granite countertops often show seams, quartz counters hide their seams much better and will look like one large piece of stone, even across large areas. Finally, it is important to note that quartz countertops are heavier and can discolor over time if they are exposed to UV radiation from the sun coming through a window. Counters in kitchens and bathrooms that will be in direct sunlight should use granite or another material to avoid discoloration from the...

read more